Aspire now brings you yet another kit with awesome flexibility and lots of power. Introducing the new Aspire 220 watt Dynamo kit. It allows for use with three different battery types, 18650, 20700 or 21700. The Dynamo can also be used in various modes, allowing you to easily select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3).
Even though the Dynamo is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. With an output wattage of up to 220 watts regardless of which type of battery is used, 18650, 20700 or 21700.
The new press fit Nepho coils supplied with the Nepho Tank come in two types with two resistances. The first, a 0.5ohm Kanthal wire coil and Aspires all new mesh coil rated at 0.15 ohms, again made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports.
On the Nepho tank, Aspire have introduced a simpler system for filling, incorporating a safer child lock mechanism. Pull up the top cap, place your thumb on the top cap right above the triangle symbol and push the top cap away until the filling hole is revealed. Then add your preferred e-liquid into the tank through the filling hole, push the top cap back into place and push the top cap down to lock. Note: As usual when using a new atomizer, let the tank stand for 5 minutes after filling so the cotton can be saturated with e liquid before use. Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the atomizer.
Press fire button to enter. When you are in “Time Set”press fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod, we’ve created 11 different types of Watch UI to expand your choices.